GV-AS2120 IP Control Panel

  • One-way control: 4 doors
  • Two-way control: 2 doors by Wiegand only, 4 doors by Wiegand, RS-485 and network
  • 4 Wiegand card readers of 26 to 64 bits
  • 8 GV-Readers and GV-GF Fingerprint Readers through RS-485 and network
  • Built-in 8 digital inputs and 8 relay outputs
  • Suitable for controlling doors, parking gates and access to elevator call buttons
  • Support for tampering alarm
  • DC 12V, 3A / PoE+ (IEEE 802.3at, provides up to 25.5 W)

Note:
  • RS485 and TCP/IP interfaces only support GeoVision readers, while Wiegand interface supports both GeoVision and 3rd party readers (Wiegand 26~64 Bits).
  • GV-AS Controller does not support 3rd party access control software
  • Specifications are subject to change without notice.


Note:
  • RS485 and TCP/IP interfaces only support GeoVision readers, while Wiegand interface supports both GeoVision and 3rd party readers (Wiegand 26~64 Bits).
  • GV-AS Controller does not support 3rd party access control software
  • Specifications are subject to change without notice.
Model No Name Details
Push Button Switch The push button switch can be integrated with access control system, allowing door exit by momentarily activating or deactivating the electric locking device. Both American standard and European standard push buttons are available.
GV-IB25 / 65 / 85 Infrared Button The GV-IB25 / 65 / 85 Infrared Button detects infrared movement within 3 to 12 cm and allows you to open the door with a wave of hand.
Electric Lock Three types of electric locks are available: electromagnetic lock, electric bolt and electric strike.
GV-AS ID Card / Key Fob & GV-UHF Tag 125 KHz and 13.56 MHz cards / key fobs, 900 MHz UHF Tag are available.
GV-POE Switch The GV-POE Switch is designed to provide power along with network connection for IP devices.
The GV-POE Switch is available in various models with different numbers and types of ports.
GV-WTR GV-WTR is a converter designed for converting Wiegand interface to RS-485 interface, and vice versa. It enables 3rd party readers to be connected to RS-485 GV-Controllers, as well as allowing GV-AI FR (software) and GV-CR1320 (RS-485 camera reader) to be connected to 3rd-party Wiegand controllers.
Power Adapter Contact our sales representatives for the countries and areas supported.
GV-FWC GV-FWC integrates GeoVision face-recognition-based cameras, software and readers into access control systems by sending access card data, paired to Face IDs, to controllers either through TCP/IP or Wiegand connection.
  • GV-AS2120
  • Battery Cable
  • Screw x 4
  • Micro SD Card 2 GB
  • Software CD / DVD
  • Warranty Card​

Note:
  • RS485 and TCP/IP interfaces only support GeoVision readers, while Wiegand interface supports both GeoVision and 3rd party readers (Wiegand 26~64 Bits).
  • GV-AS Controller does not support 3rd party access control software
  • Specifications are subject to change without notice.

Connecting GV-AS Controller to GV-Reader via TCP/IP

GV-ML1200 Electromagnetic Lock – The Characteristics of Two Different Sensors

GV-ML1200 Electromagnetic Lock - installation - Door Closure Detection Sensor

GV-ML1200 Electromagnetic Lock - installation - Magnet Clasp Detection Sensor


Note:
  • RS485 and TCP/IP interfaces only support GeoVision readers, while Wiegand interface supports both GeoVision and 3rd party readers (Wiegand 26~64 Bits).
  • GV-AS Controller does not support 3rd party access control software
  • Specifications are subject to change without notice.
  • GV-AS2120
  • Battery Cable
  • Screw x 4
  • Micro SD Card 2 GB
  • Software CD / DVD
  • Warranty Card​

Note:
  • RS485 and TCP/IP interfaces only support GeoVision readers, while Wiegand interface supports both GeoVision and 3rd party readers (Wiegand 26~64 Bits).
  • GV-AS Controller does not support 3rd party access control software
  • Specifications are subject to change without notice.