GV-CR1320

GV-CR1320

2MP H.264 IP Camera Reader

GV-CR1320 is a 13.56 MHz card reader with a built-in 2 MP camera. GV-CR1320 recognizes access control cards and grants access as regulated by the connected controller. Its camera captures the live view of entrance and transmits it to the access control system GV-ASManager through network connection, without the need of installing and maintaining a separate camera in addition to the card reader.

VoIP Calls:
When the touchpad is activated, GV-CR1320 will place a call to the operator through VoIP. The operator can then communicate with the visitor and enter an access code to open the door.

Card Swiping plus Face Detection:
The Card and Face mode enables GV-CR1320 to perform face detection together with card verification before access can be granted.
  • 2MP progressive scan super low lux CMOS
  • Minimum illumination at 0.02 lux
  • Dual streams from H.264 and MJPEG
  • Up to 15 fps at 1920 x 1080
  • Day and night function (with removable IR-cut filter)
  • Built-in IR with effective distance up to 3 m (10 ft)
  • Ingress protection (IP66)
  • DC 12V, 2.5A / PoE+ (IEEE 802.3at)
  • Built-in microphone and speaker
  • Wide Dynamic Range (WDR)
  • Built-in micro SD card slot
  • Provides 180° panorama view
  • Built-in 13.56 MHz Reader (Mifare DESFire, MIFARE Plus and MIFARE Classic)
  • GeoVision access cards with GID (GeoVision Identifier) to enhance security
  • Access by card plus face detection
  • Network interface for connecting to and access control by controllers
  • Support for GV-WTR for connecting to and access control by 3rd-party Wiegand controllers
  • 2 inputs, dry contact
  • 1 relay outputs
  • Touchpad to activate two-way communication between the operator and visitors
  • Snapshots captured upon card presented and touchpad activated
  • SIP / VoIP calling support
  • Different access control modes enabled according to the Authentication Schedule: Card only mode (default), Card and Face Mode
  • GV-Access app for push notifications

Note: 
  • To support face detection function, avoid placing the camera reader where the light source is directly behind the subject.
  • All specifications are subject to change without notice.


Note: 
  • To support face detection function, avoid placing the camera reader where the light source is directly behind the subject.
  • All specifications are subject to change without notice.
Số model Tên gọi Chi tiết
Push Button Switch The push button switch can be integrated with access control system, allowing door exit by momentarily activating or deactivating the electric locking device. Both American standard and European standard push buttons are available.
GV-IB25 / 65 / 85 Infrared Button The GV-IB25 / 65 / 85 Infrared Button detects infrared movement within 3 to 12 cm and allows you to open the door with a wave of hand.
Electric Lock Three types of electric locks are available: electromagnetic lock, electric bolt and electric strike.
GV-AS ID Card / Key Fob & GV-UHF Tag 125 KHz and 13.56 MHz cards / key fobs, 900 MHz UHF Tag are available.
GV-WTR GV-WTR is a converter designed for converting Wiegand interface to RS-485 interface, and vice versa. It enables 3rd party readers to be connected to RS-485 GV-Controllers, as well as allowing GV-AI FR (software) and GV-CR1320 (RS-485 camera reader) to be connected to 3rd-party Wiegand controllers.
Power Adapter Contact our sales representatives for the countries and areas supported.
  • GV-CR1320
  • Mounting Plate
  • Standard Screw x 2
  • Plastic Screw Anchor x 2
  • Security Screw
  • Torx Wrench
  • Silica Gel Bag
  • Micro SD Card 2 GB (inserted and formatted)
  • Download Guide
  • Warranty Card

Note: 
  • To support face detection function, avoid placing the camera reader where the light source is directly behind the subject.
  • All specifications are subject to change without notice.

Note: 
  • To support face detection function, avoid placing the camera reader where the light source is directly behind the subject.
  • All specifications are subject to change without notice.
Model No. Ordering Part No. Description SKU No.