GV-EV48 Elevator IP Control Panel

GV-EV48 is an elevator controller designed to control access of 1 elevator with a maximum of 48 floors. Up to 2 GeoVision readers can be connected to the GV-EV48 through RS-485 and/or network connections. GV-EV48 can recognize identification cards and grant access to the authorized floors regulated by GV-ASManager access control management system.
  • Grant access to specific elevator floors using access cards, card's PIN code or fingerprint
  • GV-EV48 – 24 Floors: Built-in 24 relay outputs to support up to 24 elevator floors
  • GV-EV48 – 48 Floors: Built-in 48 relay outputs to support up to 48 elevator floors
  • Support up to 2 GV-Readers / GV-GF Fingerprint Readers through network connection and RS-485 connection

Note:
  • Specifications are subject to change without notice.


Note:
  • Specifications are subject to change without notice.
Model No Name Details
Cabinet (GV-AS Iron Box) With the cabinet (Dimension 383.5 x 443.5 x 112.2 mm / 15.1 x 17.5 x 4.4 in), GV-AS Controllers can be mounted directly to a wall or recessed into the wall.
Access Card / Fob / Sticker / Tag GeoVision offers a wide range of access cards, fobs, stickers, and tags to meet your needs. Please refer to the product datasheet for information on compatible frequencies and accessories.
GV-WTR GV-WTR is a converter designed for converting Wiegand interface to RS-485 interface, and vice versa. It enables 3rd party readers to be connected to RS-485 GV-Controllers, as well as allowing GV-AI FR (software) and GV-CR1320 (RS-485 camera reader) to be connected to 3rd-party Wiegand controllers.
GV-FWC GV-FWC integrates GeoVision face-recognition-based cameras, software and readers into access control systems by sending access card data, paired to Face IDs, to controllers either through TCP/IP or Wiegand connection.
  • GV-EV48 – 24 Floors / 48 Floors
  • Power Adaptor 12V DC / 3A
  • Power Cord
  • Battery Cable
  • Screw x 8
  • Hex Nut x 8
  • Hex Pillar x 8
  • Micro SD Card 2 GB
  • Software CD
  • Warranty Card

Note:
  • Specifications are subject to change without notice.

Connecting GV-AS Controller to GV-Reader via TCP/IP


Note:
  • Specifications are subject to change without notice.
  • GV-EV48 – 24 Floors / 48 Floors
  • Power Adaptor 12V DC / 3A
  • Power Cord
  • Battery Cable
  • Screw x 8
  • Hex Nut x 8
  • Hex Pillar x 8
  • Micro SD Card 2 GB
  • Software CD
  • Warranty Card

Note:
  • Specifications are subject to change without notice.