• UL

GV-R1352

Card Reader

The GV-R1352 is a card reader designed to recognize identification cards. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-R1352 comes with a weather sealed and IP66 compliant housing for outdoor use.
  • Weather-proof and IP66-compliant housing (for outdoor use)
  • Wiegand interface supported
  • RS-485 output: 9,600 bps, connect up to 8 GV-R1352 units
  • 13.56 MHz for ISO14443A (MIFARE DESFire, MIFARE Plus and MIFARE Classic)
  • Support for GV-Proximity Cards with GID (Geovision Identifier) to enhance security

Note:
  • RS485 interface only supports GeoVision controllers, while Wiegand interface supports both GeoVision and 3rd party controllers (Wiegand 26/34 Bits).
  • UL 294 Attack Class Level 1 depends on other connected equipment.
  • If you are using third-party cards or key fobs, the reader must be under UID mode.
  • Specifications are subject to change without notice.


Note:
  • RS485 interface only supports GeoVision controllers, while Wiegand interface supports both GeoVision and 3rd party controllers (Wiegand 26/34 Bits).
  • UL 294 Attack Class Level 1 depends on other connected equipment.
  • If you are using third-party cards or key fobs, the reader must be under UID mode.
  • Specifications are subject to change without notice.
Model No Name Details
GV-MountA900 100 x 68 mm (3.9 x 2.7")
Supported Power Box Type:Single Gang (US standard)
GV-AS ID Card & GV-AS ID Key Fob For Card Mode, the GV-AS ID Card / Tag is required. 13.56 MHz cards and tags are available.
  • GV-R1352 Card Reader
  • Screw x 3
  • Screw Anchor x 2
  • Security Torx
  • Software CD
  • Installation Guide
  • Warranty Card

Note:
  • RS485 interface only supports GeoVision controllers, while Wiegand interface supports both GeoVision and 3rd party controllers (Wiegand 26/34 Bits).
  • UL 294 Attack Class Level 1 depends on other connected equipment.
  • If you are using third-party cards or key fobs, the reader must be under UID mode.
  • Specifications are subject to change without notice.

Setting GeoVision Readers to Read UID or GID


Note:
  • RS485 interface only supports GeoVision controllers, while Wiegand interface supports both GeoVision and 3rd party controllers (Wiegand 26/34 Bits).
  • UL 294 Attack Class Level 1 depends on other connected equipment.
  • If you are using third-party cards or key fobs, the reader must be under UID mode.
  • Specifications are subject to change without notice.