GV-GF1921 GV-1922

GF Fingerprint Reader

The fingerprint reader can work with GV-AS / GV-EV Controller and GV-ASManager to create a complete access control system. Three types of operation modes are supported: Card + Fingerprint, Fingerprint Only and Card Only.
  • Work with GV-AS / GV-EV Controller and GV-ASManager
  • Can be a standalone fingerprint reader
  • Three types of access modes: card only, fingerprint only and card plus fingerprint
  • Connect with GV-AS Controller through TCP/IP interface (WAN)
  • Enroll fingerprints through TCP/IP connection with GV-ASManager (Fingerprint Only Mode)
  • Support for GV-Proximity Cards with GID (Geovision Identifier) to enhance security

Note: 
  • For data synchronization with GV-ASController and GV-ASManager through the Ethernet, it only supports the following controller firmware version and software version: 
    * GV-ASManager: V4.0 or later
    * GV-AS210 / 410 / 810: V1.1 or later
    * GV-AS2110 / 4110 / 8110: V1.23 or later
  • GV-GF1921 / 1922 do not support third-party controllers.
  • All specifications are subject to change without prior notice.


Note: 
  • For data synchronization with GV-ASController and GV-ASManager through the Ethernet, it only supports the following controller firmware version and software version: 
    * GV-ASManager: V4.0 or later
    * GV-AS210 / 410 / 810: V1.1 or later
    * GV-AS2110 / 4110 / 8110: V1.23 or later
  • GV-GF1921 / 1922 do not support third-party controllers.
  • All specifications are subject to change without prior notice.
Model No Name Details
GV-AS ID Card & GV-AS ID Key Fob For Card Mode, the GV-AS ID Card / Tag is required. 13.56 MHz cards and tags are available.
  • Fingerprint reader
  • Data Cable (of 30 cm / 0.98 feet)
  • Manager Enroll Card
  • Manager Delete Card
  • Mounting Plate
  • Standard Screw x 2
  • Plastic Screw Anchor x 2
  • Security Screw
  • Torx Wrench
  • Connector Wire
  • Software CD
  • Warranty Card

Note: 
  • For data synchronization with GV-ASController and GV-ASManager through the Ethernet, it only supports the following controller firmware version and software version: 
    * GV-ASManager: V4.0 or later
    * GV-AS210 / 410 / 810: V1.1 or later
    * GV-AS2110 / 4110 / 8110: V1.23 or later
  • GV-GF1921 / 1922 do not support third-party controllers.
  • All specifications are subject to change without prior notice.

Note: 
  • For data synchronization with GV-ASController and GV-ASManager through the Ethernet, it only supports the following controller firmware version and software version: 
    * GV-ASManager: V4.0 or later
    * GV-AS210 / 410 / 810: V1.1 or later
    * GV-AS2110 / 4110 / 8110: V1.23 or later
  • GV-GF1921 / 1922 do not support third-party controllers.
  • All specifications are subject to change without prior notice.