GV-AS4110 Kit

GV-AS4110 Kit is a cabinet containing a GV-AS4110, a power adapter board, a power supply and a casing for backup battery. The power supply provides power to GV-AS4110 and up to 8 output devices (12V, 0.9A per device).
  • One-way and two-way control of 4 doors
  • 8 Wiegand card readers of 26 to 64 bits
  • 8 GV-Readers and GV-GF Fingerprint Readers through RS-485 and network
  • Built-in 16 inputs and 24 relay outputs
  • Suitable for controlling doors, parking gates and access to elevator call buttons
  • Support for tampering alarm

Note:
  • RS485 and TCP/IP interfaces only support GeoVision readers, while Wiegand interface supports both GeoVision and 3rd party readers (Wiegand 26~64 Bits).
  • GV-AS Controller does not support 3rd party access control software
  • Specifications are subject to change without notice.


Note:
  • RS485 and TCP/IP interfaces only support GeoVision readers, while Wiegand interface supports both GeoVision and 3rd party readers (Wiegand 26~64 Bits).
  • GV-AS Controller does not support 3rd party access control software
  • Specifications are subject to change without notice.
Model No Name Details
Push Button Switch The push button switch can be integrated with access control system, allowing door exit by momentarily activating or deactivating the electric locking device. Both American standard and European standard push buttons are available.
GV-IB25 / 65 / 85 Infrared Button The GV-IB25 / 65 / 85 Infrared Button detects infrared movement within 3 to 12 cm and allows you to open the door with a wave of hand.
Electric Lock Three types of electric locks are available: electromagnetic lock, electric bolt and electric strike.
GV-AS ID Card & GV-AS ID Key Fob For Card Mode, the GV-AS ID Card / Tag is required. 13.56 MHz cards and tags are available.
  • GV-AS4110 Kit (US standard or EU standard)
  • Iron box key
  • Iron box screw x 6
  • Self-adhesive cable tie mounts x 6
  • Power cord for battery
  • Micro SD Card 2 GB
  • Software CD
  • Warranty Card

Note:
  • RS485 and TCP/IP interfaces only support GeoVision readers, while Wiegand interface supports both GeoVision and 3rd party readers (Wiegand 26~64 Bits).
  • GV-AS Controller does not support 3rd party access control software
  • Specifications are subject to change without notice.

Connecting GV-AS Controller to GV-Reader via TCP/IP

GV-ML1200 Electromagnetic Lock – The Characteristics of Two Different Sensors

GV-ML1200 Electromagnetic Lock - installation - Door Closure Detection Sensor

GV-ML1200 Electromagnetic Lock - installation - Magnet Clasp Detection Sensor


Note:
  • RS485 and TCP/IP interfaces only support GeoVision readers, while Wiegand interface supports both GeoVision and 3rd party readers (Wiegand 26~64 Bits).
  • GV-AS Controller does not support 3rd party access control software
  • Specifications are subject to change without notice.