|
|
- H.264, MPEG4, MJPEG
- 2-Channel full D1 real-time video / audio
- Compact size
- PoE / 12V DC
- Tampering Alarm
- USB storage recording
- Support GPS, GV-GIS
- Support UMTS/ 3G / 3.5G
- Support over 40 branded speed dome protocols
|
GV-VS12 is a powerful H.264 Video Server with compact size and supports multiple applications. It supports PoE, and 2-channel full D1 real-time video and audio encoding, fully integrated with GV-NVR to form the most powerful IP surveillance solution. It also supports over 40 branded speed dome protocols to fulfill various project demands. It can record video to a local USB storage, forming the smallest video recorder. With GPS and UMTS/3G/3.5G support, it provides GIS solution integrated with GV-GIS. It can also active Tampering Alarm alerts when a tampering event happens to prevent crime events. |
 |
|
| SPECIFICATIONS |
| Video |
| Video Standard |
NTSC, PAL |
| Video Input |
2 channels |
| Compression |
H.264, MPEG 4, MJPEG |
Frame Rate
(at Full D1 resolution) |
NTSC |
30 fps per channel; 60 fps in total |
| PAL |
25 fps per channel; 50 fps in total |
| Resolution |
Full D1, Half D1, CIF, QCIF |
| Video Streaming |
Configurable frame rate and bandwidth,
Constant and variable bitrate |
| Video Adjustment |
Brightness, Contrast, Hue, Saturation, Image Quality,Image Size, Bitrate, GOP (Group of Picture) size |
| Audio |
| Audio Input |
2 channels |
| Compression |
G.711 |
| Management |
| Event Management |
Trigger |
Schedule, Sensor Input, Motion Detection |
| Action |
Store Video (AVI format),
Email with captured images,
Captured images uploaded over FTP,
Monitoring by Center V2, VSM and GV-GIS,
Relay outputs to control external devices |
| Firmware Upgrade |
Remote upgrade by HTTP,
Firmware upgrade utility included in the Software DVD |
| Storage |
Mass storage through USB (optional) |
| Client PC Requirements |
Microsoft IE 6.x or above running on Windows 2000/XP/2003/Vista |
| Security |
IP address filtering |
| Network |
| Interface |
10/100 Base-T Ethernet,
802.11b/g, 802.11n Wireless LAN (optional) |
| Protocol |
HTTP, TCP, UDP, SMTP, FTP, DHCP, NTP, UPnP, DynDNS |
| Connector |
| Video Input |
BNC 2 ports |
| Audio Input |
RCA 2 ports |
| Audio Output |
RCA 1 port |
| Terminal Block |
RS-232 interface for GPS |
| RJ-45 Connector |
2 digital inputs, 2 relay outputs, RS±485 |
| Ethernet |
RJ-45, 10/100 Mbps |
| USB 2.0 |
2 ports |
| Power |
Power Jack |
1 DC-In power jack |
| Input |
100-240V, 1.2A, 50-60 mHz |
| Output |
12V, 3A, (36W Max.) |
| Power over Ethernet |
| PoE Standard |
IEEE 802.3af Power over Ethernet / PSE |
| PoE Power Supply Type |
End-Span |
| PoE Power Output |
Per Port 48V DC, 350mA. Max. 15.4 watts |
| Alarm |
| Sensor Input |
2 inputs |
| Alarm Output |
2 outputs |
| Environment |
| Operation Temp. |
-20 ~ 55 °C / -4 ~ 131 °F |
| Humidity |
0 ~ 85% RH (non-condensing) |
| Physical |
| Dimensions (L x W x H) |
123 x 106 x 25 mm / 4.84 x 4.17 x 0.98 in |
| Weight |
0.345 kg / 0.76 lb (Net) |
* Note: Product design and specifications are subject to change without notice.
** Note: The maximum number of connections to the GV-Video Server is 20. When one GV-System connects to one GV-Video Sever, it takes up to 4 connections. When users connect to one GV-Video Server through browser, it takes up to 2 connections. When users operate the Camera/Audio Control on Center V2, it takes 1 connection. |
|
| Options |
| Optional devices can expand your GV-Video Server's capabilities and versatility. Contact your dealer for more information. |
| GV-GPS Receiver |
GV-GPS Receiver is a Global Position System receiver, allowing you to perform vehicle tracking and location verification functions. It is available in two types of interfaces: UART and RS-232. |
| GV-Relay V2 |
Working with this module, GV-Video Server can drive the loads of relay outputs over 5 volts. |
| GV-Storage System |
The iSCSI storage system allows you to record files over the Internet. |
|
|
|
