The GV-Pad is a panel device that decodes and displays incoming IP streams from GeoVision and third-party IP devices. It is light-weighted and requires only minimal amount of installation. As a standalone device, the GV-Pad is self equipped with a display screen and supports almost all the features of a GV-IP Decoder Box. Through the network, a GV-Pad can receive and manage up to 64 IP streams. The administrators can monitor channels, take snapshots of critical moments and pause at a specific channel when events occur, all through the supplied remote control. GV-Joystick can be installed to control GeoVision and third-party PT / PTZ / Speed Dome cameras.
Features
Decode video streams in H.264 codec at a maximum frame rate of the IP device
Decode up to 5 megapixel IP cameras
Decode up to 64 IP streams
Support for 3rd party IP cameras that adhere to RTSP, ONVIF or PSIA
Support for display of Matrix view through GV-Mobile Server
Support for 10/100 Ethernet over LAN
Support for Wi-Fi
Support for single and sequential display
Support for GV-Joystick control of GeoVision and third-party PT, PTZ and Speed Dome cameras
Support for remote firmware upgrade, IP address configuration and addition of new channel
Display of Matrix view through GV-Mobile Server
IR remote control
SD card and USB drive for snapshot storage and firmware upgrade
* No SD/SDHC card slot & local storage function for Argentina
Compatible Devices
Specifications
Overview
Accessories
Packing List
The GV-Pad is compatible with:
1. Most GeoVision IP devices (of the indicated firmware versions) using H.264 codec
2. GV-SD200 using H.264 codec through ONVIF
3. Third-party IP devices that support H.264 and adhere to RTSP, ONVIF or PSIA.
Supported GeoVision IP Devices
Device Type
Models
Firmware Versions
Box Camera
GV-BX110D
V1.08 or later
All models
(except GV-BX110D)
V1.06 or later
Bullet Camera
GV-BL110D
V1.08 or later
All models
(except GV-BL110D)
V1.06 or later
Cube Camera
Fixed Dome Vandal Proof IP Dome
All models
V1.06 or later
Mini Fixed Dome
GV-MFD110
V1.08 or later
All models
(except GV-MFD110)
V1.06 or later
PT Camera
PTZ Camera
GV-PT110D
GV-PTZ010D
V1.02 or later
V1.0 or later
Speed Dome
GV-SD010
GV-SD200
V1.02 or later
V1.0 or later
Video Server
GV-VS04H
V1.04 or later
Video Server
GV-VS11
V1.0 or later
Video Server
GV-VS12
V1.05 or later
Compact DVR
GV-Compact DVR V3 series only
V1.0 or later
IMPORTANT: The connected GeoVision and third-party channels must be set with H.264 codec to be compatible.
To decode and display non-H.264 IP channels or analog channels, connect the devices to GV-System and access them through GV-Mobile Server. The supported devices are listed below.
Supported Devices Connected to GV-System
Analog cameras
All models of GeoVision IP cameras, GV-Video Server, GV-Compact DVR, GV-IP Speed Dome, GV-Smart Box and GV-DSP LPR
The GV-WiFi USB adapter is a plug-and-play device that provides wireless connectivity to GeoVision IP devices. The GV-WiFi USB Adapter complies with IEEE802.11 b/g/n (Draft 3.0) standards for wireless networking.
GV-Pad × 1
IR remote control × 1
Magnetic hinge x 1
Screw x 4
AC/DC adapter × 1 (12 V, 3 A, 36 W)
Power cord x 1
GV-IP Decoder Box and GV-Pad Software DVD x 1
GV-IP Decoder Box and GV-Pad Quick Start Guide
Note: Specifications are subject to change without notice.
Compatible Devices
