| Home | Contact Us | Careers |  
 
IP Camera
Surveillance System
Video Management Software
Capture Card
Access Control
LPR/ANPR
Digital Signage
PoE Switch
HD-SDI
Hardware Accessory
Datasheet
Introduction

The GV-IP Decoder Box is designed to decode incoming IP streams from GeoVision and third-party IP devices, and displaying them on a monitor. To be used with only a monitor, the GV-IP Decoder Box provides a cost-effective solution for video surveillance as opposed to the traditional DVR and PC setup. The security administrator can monitor channels, take snapshots of critical moments, and pause at a channel when events occur, all through the supplied remote control. GV-Joystick can be installed to control GeoVision and third-party PT / PTZ / Speed Dome cameras.
Features
  • Decode video streams in H.264 codec at a maximum frame rate of the IP device
  • Decode up to 5 megapixel IP cameras
  • Decode up to 64 IP streams
  • Support for third-party IP cameras that adhere to RTSP, ONVIF or PSIA
  • Support for display of Matrix view through GV-Mobile Server
  • Support for 10/100 Ethernet over LAN
  • Support for Wi-Fi
  • Support for single and sequential display
  • VGA and HDMI Video outputs
  • Video output resolution up to 1080p
  • Support for GV-Joystick control of GeoVision and third-party PT, PTZ and Speed Dome cameras
  • Support for remote firmware upgrade, IP address configuration and addition of new channel
  • IR remote control
  • SD/SDHC card and USB drive for snapshot storage and firmware upgrade
    • * No SD/SDHC card slot & local storage function for Argentina
  • Compatible Devices
  • Specifications
  • Dimensions
  • Mount
  • Accessories
  • Packing List

The GV-IP Decoder Box is compatible with:
1. Most GeoVision IP devices (of the indicated firmware versions) using H.264 codec
2. GV-SD200 using H.264 codec through ONVIF
3. Third-party IP devices that support H.264 and adhere to RTSP, ONVIF or PSIA.

Supported GeoVision IP Devices
Device Type Models Firmware Versions
Box Camera GV-BX110D V1.08 or later
All models
(except GV-BX110D) 		V1.06 or later
Bullet Camera GV-BL110D V1.08 or later
All models
(except GV-BL110D)		 V1.06 or later
Cube Camera
Fixed Dome
Vandal Proof IP Dome 		All models V1.06 or later
Mini Fixed Dome GV-MFD110 V1.08 or later
All models
(except GV-MFD110)		 V1.06 or later
PT Camera
PTZ Camera 		GV-PT110D
GV-PTZ010D 		V1.02 or later
V1.0 or later
Speed Dome GV-SD010
GV-SD200 		V1.02 or later
V1.0 or later
Video Server GV-VS04H V1.04 or later
Video Server GV-VS11 V1.0 or later
Video Server GV-VS12 V1.05 or later
Compact DVR GV-Compact DVR V3 series only V1.0 or later
IMPORTANT: The connected GeoVision and third-party channels must be set with H.264 codec to be compatible.

 

To decode and display non-H.264 IP channels or analog channels, connect the devices to GV-System and access them through GV-Mobile Server. The supported devices are listed below.
Supported Devices Connected to GV-System
Analog cameras
All models of GeoVision IP cameras, GV-Video Server, GV-Compact DVR, GV-IP Speed Dome, GV-Smart Box and GV-DSP LPR
11 brands of third-party IP cameras. For detail, see http://www.geovision.com.tw/english/4_21.asp

Video
Video Codec H.264
Video Output at 60 Hz HDMI VGA
480p 640 x 480
720p 1024 x 768
1080i 1280 x 768
1080p 1366 x 768
Network
Interface 10/100 Ethernet
Protocol TCP, RTSP, ONVIF, PSIA
Mechanical
IR Remote Control Yes
Connectors Power 12V DC Jack
Ethernet RJ-45
Monitor Output HDMI, VGA
Local Storage & Firmware USB slot (2.0 backward compatible, FAT32 format)
Upgrade SD/SDHC card slot (for Class 6 or above, FAT32 format)
General
Operating Temperature 0 °C ~ 40 °C (32 °F ~ 104 °F)
Operating Humidity 20 % ~ 80 %
Dimensions (W x H x D) 182.5 × 29 × 141.5 mm (7.19 × 1.14 × 5.58")
Net Weight 615 g (1.36 lb)
Power DC 12 V
Power Consumption 36 W (max. 3 A at 12V DC)
Regulatory CE, FCC compliant
Language English




 


Front View
Rear View
IR Remote Control

Name Details

Wall Mount Kit		 The Wall Mount Kit is used to mount the GV-IP Decoder Box to the wall.

VESA Monitor Mount Kit		 The VESA Monitor Mount Kit is used to mount the GV-IP Decoder Box to the back of a VESA monitor.

GV-Joystick		 The GV-Joystick facilitates focusing, zooming, panning, tilting of GeoVision and third-party PT, PTZ and Speed Dome cameras on GV-IP Decoder Box.

GV-WiFi USB Adapter		 The GV-WiFi USB adapter is a plug-and-play device that provides wireless connectivity to GeoVision IP devices. The GV-WiFi USB Adapter complies with IEEE802.11 b/g/n (Draft 3.0) standards for wireless networking.

  • GV-IP Decoder Box × 1
  • IR remote control × 1
  • AC/DC adapter × 1 (12 V, 3 A, 36 W)
  • Power cord x 1
  • GV-IP Decoder Box and GV-Pad Software DVD x 1
  • GV-IP Decoder Box and GV-Pad Quick Start Guide x 1

Note: Specifications are subject to change without notice.

    Terms of Use | Reporting Piracy