Note: GV-Recording Server is not supported for playback at GV-Edge Recording Manager.
Batch IP address assignment
OS X 10.9 or later
(with Dual Streams)
Mac mini (Core i5-3210M, 8 GB RAM)
Compatible GeoVision IP Devices and Software
V3.00 or later
GV-IP Speed Dome
V1.04 or later
V1.02 or later
V1.03 or later
V1.07 or later
V1.01 or later
V184.108.40.206 or later
V14.10 or later
Recording to GV-NAS Systems is only supported by GV-IP Camera and GV-Target Camera of the specified versions.
Files recorded to GV-NAS Systems are stored in the MPEG4 format and those recorded to memory cards are stored in the AVI format.
Currently, the Mac version of GV-Edge Recording Manager does not support GV-System (GV-DVR / NVR). It will support GV-System (GV-DVR / NVR) in the near future.
Supported Numbers of Hosts
No. of Channels
4, 9, 16, 36
Fisheye dewarping, zoom, snapshot
Pan, tilt and zoom
Host Recording (Monitoring)
Enable/disable monitoring of a single host or all hosts (for GV-IP Devices)
Channel Status Indicator
Not under monitoring
Under monitoring but not being recorded
Under monitoring and is being recorded
Host Batch Management
NAS setup, IP address configuration (for GV-IP Devices)
Note: NAS setup is supported by GV-IP Camera (firmware V3.0 or later) and GV-Target Camera (firmware V1.02 or later).
No. of Remote Playback windows
Note: All specifications are subject to change without prior notice.
GV-Edge Recording Manager - Introduction
Recording IP Cameras to GV-NAS System through GV-Edge Recording Manager - Mac Version
GV-NAS System is a Linux-based, network attached storage device designed to store GV-IP Camera and GV-Target Camera recordings.