The battery is an uninterruptible power supply (UPS) device, designed to supply GV-AS Controllers’ power during power failure. For GV-AS100 / 110 / 120, GV-ASBox or GV-ASNet is required to use GV-Battery.
The reader supports three operation modes: Fingerprint Only, Fingerprint + Card and Card Only. In Fingerprint Only mode, the fingerprints are enrolled through GV-ASManager. In Fingerprint + Card mode, the fingerprint templates are stored on the user card. In Card Only mode, the users only need to swipe the card to be granted access. Readers with optical and capacitance sensors are available.
GV-ASKeypad with LCD display is a hot-swapping device, giving you convenience to configure GV-AS400.
Only available for 400 / 810. With the cabinet, GV-AS Controllers can be mounted directly to a wall or recessed into the wall.
Two types of cabinet dimensions are available (W x H x D):
• 383.5 x 443.5 x 112.2 mm / 15.1 x 17.5 x 4.4 in
• 300 x 420 x 86 mm / 11.8 x 16.5 x 3.4 in
The push button switch can be integrated with access control system, allowing door exit by momentarily activating or deactivating the electric locking device. Both American standard and European standard push buttons are available.