GV-IPCAM H.264
1. Box Camera - GV-BX120D
2. Bullet Camera -
GV-BL120D
3. Vandal Proof Dome -
GV-VD120D
4.
Fixed Dome - GV-FD120D
5. Mini Fixed Dome -
GV-MFD120
1.09
2012/01/02
42.3MB
GV-IPCAM H.264
1. Box Camera - GV-BX130D/GV-BX220D/320D/520D
2. Bullet Camera - GV-BL130D/GV-BL220D/320D
3. Vandal Proof Dome - GV-VD220D/320D
4. Fixed Dome - GV-FD220D/320D
5. Mini Fixed Dome -
GV-MFD130/220/320/520
6. Fisheye Camera - GV-FE420/421/520/521
7. Cube
Camera - GV-CB120/220, CBW120/220
1.09
2012/01/02
42.4MB
To upgrade to firmware V1.09, it is required to use the latest version of GV IP Device Utility (V8.5.3.0).
GV-IPCAM H.264 1. Box Camera - GV-BX110
2. Bullet Camera - GV-BL110
3. Mini Fixed Dome -
GV-MFD110
4. Fisheye Camera -
GV-FE110/111
5. PTZ Camera -
GV-PTZ010D & GV-PT110D
1.08
2011/11/17
17.31MB
GV-IP Speed Dome
1.02
2012/02/21
17.9MB
GV-IP Camera
1.09
2010/05/26
14.3 MB
GV-Video Server
GV-Video Server (GV-VS02A)
1.05
2011/01/14
16.2MB
GV-Video Server (GV-VS04A & GV-VS04H)
1.05
2012/01/11
18.8MB
GV-Video Server (GV-VS12)
1.05
2011/12/30
20.5MB
GV-Video Server (GV-VS02)
1.49
2010/03/08
8.40MB
Accessory
GV-IP Decoder Box
1.01
2012/01/19
13.3MB
GV-Pad
1.01
2012/01/19
13.3MB
Video Server (GV-VS02) Version History:
Firmware V1.49 2010-03-08
Fixed:
Lag issue that occurred when no storage device was connected to the GV-Video Server
Failure of playing video through Remote ViewLog when you clicked several events from the Event List at one time
Failure of playing video through Remote ViewLog in Quad View mode
Firmware V1.48 2009-12-01
Bug fixed:
Problem of disconnecting from Control Center or GV-GIS through wireless broadband access
Problem of using the USB flash drive
Incorrect output status that occurred once the GV-Video Server was connected to the GV-System in Pulse mode
Incorrect time length for Pulse mode that occurred once the GV-Video Server was connected to the GV-System
Incorrect display of camera status on the Monitoring page after video was lost
Failure of Wiegand function after the GV-Video Server was rebooted
Automatic retry issue
Lag issue for the video with lower bit rate
Issue of the output triggered by motion detection
Failure of audio function after you hided the selection menu on the left side of the Live View
Issue of downloading OCX on Internet Explore 8
Firmware V1.46 2009-02-11
New:
The Disk Full / Fault LED flickering every 5 seconds when GV-Video Server is recoding
Multicast and Audio Broadcast
Remote control of I/O devices allowed from GV-System V8.3
GPS data to be resent after the connection to GV-GIS is rebuilt
Support for Verizon Wireless USB727 Modem
Fixed:
Incorrect longitude and latitude values displayed during GPS tracking
Failure of rebooting the GV-Video Server on the web setting page.
Failure of setting alert interval time on both E-Mail and FTP setting pages
Failure of the PTZ Preset function when input devices were triggered
Firmware V1.45 2008-10-21
New:
Support for Geo-GIS (Geographic Information System)
Support for a new UMTS module: GlobeSurfer iCON7.2
Uploading of snapshot images in the sequence to FTP Server upon trigger events
Resolution options for snapshots added to E-Mail and FTP alert settings
“1 frame per second” option added to video settings
“Baud Rate” option added to GPS settings
Additional input device included for triggering the operations of “Start monitoring” and “Stop monitoring”
Support for the playback of files recorded during Daylight Saving Time period with ViewLog player of version 8.3
Fixed:
Failure of Panasonic PTZ function
Inconsistency between audio and video occurred when GV-NVR was in connection
Issues of Wiegand function that failed to send cardholder data to Center V2 and VSM, and the video server was rebooted
Incorrect time stamp on the image after the Time Zone setting was changed
Failure to send an e-mail to multiple recipients
Failure to send monitoring commands to Center V2 and VSM
An issue related to repair AVI files
Modified:
Settings for Video, Schedule, Time Synchronization, Input and Output to be protected when the monitoring is started.
Wired Ethernet connection to coexist with wireless Ethernet connection
“Overlaid with IO input name” option added to display the names of inputs on images
“Keep Check UMTS Connection” option added to enable the automatic connection check and retry
Fixed:
Error of audio recorded on Motion Detection mode despite that the “Record audio” option was already disabled
GPS function sent wrong information about longitude and latitude to the Geo-GIS program
Problem of resuming interrupted file transfer of files from GV-Video Server via Remote ViewLog
Incorrect time synchronization with the time server
Internal clock inaccuracy
Problem of motion detection that may not trigger FTP/e-mail alerts and recording
Issues of UMTS (Universal Mobile Telephone System) connection
Modified:
Resolution of snapshots for e-mail and FTP alerts to be determined by the resolution of Video Settings
Output Setting page by adding the “Enable” option
Default time setting to be “Synchronized with Network Time Server” instead of manually modifying the time
Preset value for GOP to be “2” instead of “1” when the network connection is set to be 3GPPv6 or 3GPPv7
Firmware V1.42 2008-03-13
New:
Support for multiple languages for Web interface: Thai / Hungarian / Russian / Serbian / Danish / Polish / German / Spanish / Czech / Japanese / Traditional Chinese / French / Portuguese / Italian / Hebrew / Simplified Chinese
Support for new UMTS device: Brandrich BandLuxe C100
A new option in “Input Settings” to send the image of desired camera(s) to Center V2 upon input trigger
A new option in “GPS Settings” to set update frequency between 1 and 30 seconds
Fixed:
Failure to format the HDD which is less than 200GB capacity
Problem of ViewLog Server that only allowed the maximum of 150 video files for playback
Compatibility issues between DDNS function and UMTS connection
Failure to modify input settings
Failure to save previous settings for Brightness, Contrast, Saturation and Hue after Video Server was restarted
Modified:
Changed defaults settings for 3GPPV6 and 3GPPV7. When you select 3GPPV7 as connection type, default values now are 1 for GOP and 7.5 (NTSC)/8 (PAL) for frame rate. When you select 3GPPV6, default values now are 1 for GOP and 5 (NTSC)/5 (PAL) for frame rate
Firmware V1.41 2008-02-13
Fixed:
Failure to send a captured still image by E-Mail or FTP
Failure to configure the Visual Automation function over Internet
Firmware V1.40 2008-02-01
New:
Support for Universal Mobile Telephone System (UMTS) technology
Support for GPS (only for Hardware Version 2.0)
"Apply the settings to all cameras" option added to Video Settings
Fixed:
Compatibility issues with Lilin domes, including preset and direction functions
Problem of narrowband connection being constantly broken
Wrong encoding of PTZ Control Panel in Hebrew edition
Error of continued recording after the scheduled time ends
Failure to reallocate DDNS IP address after rebooting
Modified:
Extended the duration of "Trigger Pulse Mode" in Output Setting to 60 seconds
Increased the number of characters entered in the FTP Remote Directory field to 30
Changed the format of pictures sent by FTP or SMTP to .JPG
Removed "Time Offset" option from Date and Time Setting
Disabled "Daylight Saving Time" option when time is set manually
Changed weekday settings in Recording Schedule to time frame (Span) settings for Monday to Sunday
Improved:
Support for On-Screen Display (OSD) when connected PTZ devices provide this function
Enhanced Live View functions and user interfaces
Firmware V1.31 2007-07-20
Modified:
Set output to default when monitoring mode (manual/schedule) stopped
Fixed:
Fixed when you set the image resolutions to 720 x 480 (NTSC) / 720 x 576 (PAL) or 720 x 480 De-interlaced (NTSC) / 720 x 576 De-interlaced (PAL), the following problem may occur on the GV-System of version 8.11 or earlier:
No image appears on Center V2 of version 8.11 or earlier when activating Center V2 monitoring for alarm events.
Green image appears when the Video Server connects to the GV-System of version 8.11 or earlier.
Green image appears when connecting to the Video Server for playback using the Remote ViewLog function of version 8.11 or earlier
Motion triggers output function must work in schedule-round the clock mode
Initial values for outputs are wrong after system rebooting
Input triggers output function failed in schedule mode
Time does not match in system and remote PC
Firmware V1.30 2007-07-05
New:
Added "Keep Day" function
PTZ camera directed to a preset point upon input trigger
Added Center V2 and VSM monitoring schedules
Added options to stop notifying Center V2 and VSM of alert events
Fixed:
Adjusted PAL image position on the screen
Fixed the audio callback issue caused by unstable connection
Fixed the image issue when the live view screen was overlapped by the dialog box of another application
Fixed the remote playback problem of Remote ViewLog caused by unstable connection
Fixed Lilin PTZ Dome problems
Changed:
Changed PTZ default setting to Pelco D
Changed logo for StorVision (OEM customized)
Modified:
Modify TW2804 registers for better video quality
Firmware V1.21 2007-03-02
New:
Add the "Monitoring Settings" page, featuring:
Manual recording
I/O monitoring by input trigger
Display of recording status
Add the "Remote ViewLog" link in the menu page
The camera can be assigned to start recording upon I/O and Wiegand devices trigger.
Support 13 languages.
Fixed:
Password error when it was set with 7 characters.
Connection lost to the server when live audio (Microphone feature) was enabled and then disabled.
