| |
|
|
| Product |
Version |
Date |
Size |
Link |
GV-AS400 Controller
|
V1.03
|
2011-07-01 |
1.42 MB |
 |
GV-AS100 Controller
|
V1.05
|
2011-04-07 |
90.4 KB |
|
GV-AS110 Controller
|
V1.05
|
2011-04-08 |
103 KB |
|
GV-ASBox
|
V1.05
|
2011-02-24 |
1.34 MB |
|
GV-ASNet
|
V1.05
|
2011-02-24 |
1.32 MB |
|
GV-AS200 Controller
|
V2.02
|
2010-12-13 |
59.2KB |
|
GV-AS200 Controller Ethernet |
V2.01
|
2010-03-12 |
1.13MB |
|
GV-RK1352 Card Reader |
V1.10
|
2011-02-09 |
115 KB |
|
GV-ASController, GV-ASBox and GV-ASNet Version History:
Firmware Update 2011-09-06
Firmware V1.05 includes the following models:
- GV-AS100 / GV-AS110 / GV-AS120 (brand-new)
- GV-ASBox / GV-ASNet
Firmware V1.03 includes the following models:
GV-AS100 V1.05
New:
- Support for Mifare DESFire, Mifare Plus and Mifare Class cards
- Support for only requiring access card to unlock entry or exit door under Card and PIN mode
GV-AS110 V1.05
New:
- Support for Mifare DESFire, Mifare Plus and Mifare Class cards
- Support for only requiring access card to unlock entry or exit door under Card and PIN mode
Fixed:
- Visitor cards denied before deactivation time is passed
GV-AS400 V1.03
New:
- I/O naming and recording upon output trigger
- Support for only requiring access card to unlock entry or exit door under Card and PIN mode
GV-ASBox V1.05
New:
- Support for Mifare DESFire, Mifare Plus and Mifare Class cards
GV-ASNet V1.05
New:
- Support for Mifare DESFire, Mifare Plus and Mifare Class cards
Firmware Update 2010-12-13
The version history applies to the following firmware version for each device:
- GV-AS100 V1.04
- GV-AS200 V2.02
- GV-AS400 V1.02
- GV-ASBox V1.04
Note: Starting from this version, GV-AS100 and GV-ASBox will no longer share the same firmware.
New:
- Support for GV-RK1352 Reader (GV-AS100/AS400)
- Support for visitor card and related functions in GV-VMWeb (GV-AS100/AS200/AS400)
- Support for handicap card (GV-AS100/AS200/AS400)
- Support for release by card during release mode (GV-AS100/AS400)
- Support for GV-ASNet (GV-AS100)
- Support for I/O naming and I/O log (GV-AS100 and GV-ASBox)
GV-AS200 Controller Firmware V2.00 2009-05-07
Fixed:
- Incorrect writing of card bits to GV-ASManager
- Failure to transmit temporarily stored data to GV-ASManager after connection recovery
- Failure to transmit events in a sequence to GV-ASManager
- TCP/IP connection problem occurred when a large amount of data were transmitted GV-ASManager
- Incorrect icon to indicate connection status which only occurred in TCP/IP connection
Improved:
- The maximum value in "Held Open Time" increased from 255 sec. to 9999 sec.
Changed:
- The process of loading defaults activated automatically after firmware update of GV-AS200 Controller
|
|
|
|
