GV-IPCAM H.264
1. Box Camera - GV-BX120D
2. Bullet Camera -
GV-BL120D
3. Vandal Proof Dome -
GV-VD120D
4.
Fixed Dome - GV-FD120D
5. Mini Fixed Dome -
GV-MFD120
1.09
2012/01/02
42.3MB
GV-IPCAM H.264
1. Box Camera - GV-BX130D/GV-BX220D/320D/520D
2. Bullet Camera - GV-BL130D/GV-BL220D/320D
3. Vandal Proof Dome - GV-VD220D/320D
4. Fixed Dome - GV-FD220D/320D
5. Mini Fixed Dome -
GV-MFD130/220/320/520
6. Fisheye Camera - GV-FE420/421/520/521
7. Cube
Camera - GV-CB120/220, CBW120/220
1.09
2012/01/02
42.4MB
To upgrade to firmware V1.09, it is required to use the latest version of GV IP Device Utility (V8.5.3.0).
GV-IPCAM H.264 1. Box Camera - GV-BX110
2. Bullet Camera - GV-BL110
3. Mini Fixed Dome -
GV-MFD110
4. Fisheye Camera -
GV-FE110/111
5. PTZ Camera -
GV-PTZ010D & GV-PT110D
1.08
2011/11/17
17.31MB
GV-IP Speed Dome
1.02
2012/02/21
17.9MB
GV-IP Camera
1.09
2010/05/26
14.3 MB
GV-Video Server
GV-Video Server (GV-VS02A)
1.05
2011/01/14
16.2MB
GV-Video Server (GV-VS04A & GV-VS04H)
1.05
2012/01/11
18.8MB
GV-Video Server (GV-VS12)
1.05
2011/12/30
20.5MB
GV-Video Server (GV-VS02)
1.49
2010/03/08
8.40MB
Accessory
GV-IP Decoder Box
1.01
2012/01/19
13.3MB
GV-Pad
1.01
2012/01/19
13.3MB
GV-Compact DVR Version History:
Firmware V1.56 2010-03-08
Fixed:
Lag issue that occurred when no hard disk was connected to the GV-Compact DVR
Issue of triggering the output device through motion detection
Failure of automatic reconnection after PPPoE was disconnected
Failure of the FTP server
Failure of playing video through Remote ViewLog when you clicked several events from the Event List at one time
Failure of playing video through Remote ViewLog in Quad View mode
Failure of configuring "Visual Automation" settings through the Web interface
Incorrect frame rates that occurred when playing back several video files with different frame rates together through the OSD
Problem of playing audio in the single-channel division through the OSD
Problem of using the Page Up key with Lilin (PIH) Camera through the OSD
Problem of time-overlapping schedule through the OSD
Failure of saving "Latch Mode" in the Digital Input Settings through the OSD
Failure to import the configuration file through GV IP Device Utility
Login failure that occurred because there were many connection requests and automatic retry did not work
Modified:
Shortened the time of firmware upgrade from 15 minutes to 5 minutes
Changed:
Now not allowed users to modify Alarm Settings through the OSD after the monitoring is activated
Firmware V1.54 2009-02-11
New:
Remote control of I/O devices allowed from GV-System V8.3
GPS data to be resent after the connection to GV-GIS is rebuilt
Support for Verizon Wireless USB727 Modem
Fixed:
Incorrect longitude and latitude values displayed during GPS tracking
Failure of WEP authentication type when using OSD settings
Failure of the PTZ Preset function when input devices were triggered
Problem of using Lilin 7625 PTZ camera
Firmware V1.53 2008-10-27
New:
Support for Geo-GIS (Geographic Information System)
Support for a new UMTS module: GlobeSurfer iCON7.2
"1 frame per second" option added to video settings
"Baud Rate" option added to GPS settings
Additional input device included for triggering the operations of "Start monitoring" and "Stop monitoring"
Support for the playback of files recorded during Daylight Saving Time period with ViewLog player of version 8.3
Fixed:
Failure of Panasonic PTZ function
Inconsistency between audio and video that occurred when GV-NVR was in connection
Incorrect time stamp on the image after the Time Zone setting was changed
Failure to send monitoring commands to Center V2 and VSM
An issue related to repair AVI files
Failure of "Set PTZ camera to preset point" function
Network interruption occurred when UPnP function was disabled
Modified:
Settings for Video, Schedule, Time Synchronization, Input and Output to be protected when the monitoring is started.
Wired Ethernet connection to coexist with wireless Ethernet connection
"Overlaid with IO input name" option added to display the names of inputs on images
"Keep Check UMTS Connection" option added to enable the automatic connection check and retry
"System Log" added onto the on-screen display menu to allow users view and save the events logged on GV-Compact DVR
Modified:
Output Setting page by adding the "Enable" option
Default time setting to be "Synchronized with Network Time Server" instead of manually modifying the time
Icons on the main screen to be repositioned
Fixed:
Error of audio recorded on Motion Detection mode despite that the "Record audio" option was already disabled
GPS function sent wrong information about longitude and latitude to the Geo-GIS program
Problem of resuming interrupted file transfer of files from GV-Compact DVR via Remote ViewLog
Incorrect time synchronization with the time server
Internal clock inaccuracy
Issues of UMTS (Universal Mobile Telephone System) connection
Error of detecting PAL signal format on VGA display when a PAL camera was plugged after the GV-Compact DVR was turned on
Problem of motion detection that may not trigger alarms and recording
Freezing problem when fast forwarding the video recording
Malfunction of frame rate options on the Video Settings page
Problem of trigged inputs that could not direct PTZ cameras to the preset points
Problems of tilting PTZ cameras up and down
Malfunction of the options on the Spot Monitor Settings page
Firmware V1.37 2008-03-14
New:
Support multiple languages for Web interface: English / Thai / Hungarian / Russian / Serbian / Danish / Polish / German / Spanish / Czech / Japanese / Traditional Chinese / French / Portuguese / Italian / Hebrew / Simplified Chinese
A new option in "Input Settings" to send the image of desired camera(s) to Center V2 upon input trigger
A new option in "GPS Settings" to set update frequency between 1 and 30 seconds
Modified:
Changed defaults settings for 3GPPV6 and 3GPPV7. When you select 3GPPV7 as connection type, default values now are 1 for GOP and 7.5 (NTSC)/8 (PAL) for frame rate. When you select 3GPPV6, default values now are 1 for GOP and 5 (NTSC)/5 (PAL) for frame rate
Video Quality selections in "Audio/Video Settings" OSD menu have been renamed: "Low" to "Fair", "Medium" to "Good", "High" to "Excellent"
Fixed:
Failure to save previous settings for Brightness, Contrast, Saturation and Hue after Video Server was restarted
